- Water/Waste Solutions
- Tech Portals
- Buyer's Guide
- White Papers
Donaldson Company, Inc., a manufacturer of filtration systems and parts, has released a new line of liquid filtration housings – the new
When cost-effective stainless steel housings are required for low and high flow liquid applications, the new P-FG product provides customers with a housing option that includes shorter lead-times and an affordable cost. The P-FG range is effective on applications with flow rates up to 1,000 gpm.
Donaldson's standard P-FG is built using 304 stainless steel. It is mill finished inside with a two-part paint exterior. The housing is equipped with two pressure gauges and either FNPT or Flanged connections, depending on the housing size. The housing is equipped with a vent and clean and dirty drain ports. All housings are built to accept Code 7 filter elements using 226 o-rings, bayonet locking tabs and locating fins. Donaldson’s broad selection of filter elements will meet the requirements of your process.
P-FG filter housings are also available in 316 stainless steel, as well as with ASME code. The seven standard sizes offer a wide range of capacity, depending on element selection. Custom housings are available upon request.
Donaldson’s liquid product offering consists of four housings, serving flow rates up to 1,000 gpm. A Donaldson representative can assist in determining which housing will meet your specification, installation and sanitary requirements.