Processing Magazine

Non-invasive Pipe Flow Monitoring

March 6, 2013

Pulsar-Process-Measurement-Flow-PulsePulsar Process Measurement's Flow Pulse pipe flow monitor provides exceptional repeatability, accuracy and simple installation with no down time. It is ideal for monitoring flow rate in fluid distribution systems or for pump efficiency checks at process plants and sewage pumping stations. Flow Pulse utilizes a new Digital Signal Processing approach for exceptional repeatability: Ultrasound is fired through the pipe wall at 90 degrees to the flow via a tangentially mounted high-output ceramic, then refracted at angles across the axis of the flow and subsequently reflected from bubbles, particles and vortices in all directions and at a wide range of frequencies. The wide, refracted, ultrasonic beam maximizes the ultrasound energy that could be captured from flowing particles. These multiple reflections are received back into the unit via a second crystal. The mass of data generated is analysed using Flow Pulse’s Refracted Spread Spectrum Analysis (RSSA) digital signal processing platform to derive flow information. RSSA analyses and integrates the received signals over a wide frequency range, then slices them for real-time analysis and flow rate calculation. Flow Pulse operates in a flow range from as little as 0.3m/s through to 4m/s, with a minimum particle size of 100µ and concentration of 200ppm or above (the equivalent of hard water). Pipe material can be rigid plastic, stainless steel, mild steel or cast iron. Corrugated pipe is not an issue and even light corrosion will give a good result. Flow Pulse provides repeatability and accuracy of around ±5%