Inclinometer Features Dual Programmable Setpoints with Two Discrete Outputs
The inclinometer utilizes MEMS (micro-electro-mechanical system) technology to solve unique feedback requirements. This new offering replaces the traditional analog output with two discrete outputs and is programmable for settings such as on or off points, span and hysteresis. Users can simply program the inclinometer using a teach adapter. Single axis inclinometer sensors may be used in a wide variety of industries and incorporate an adjustable measuring range of 360 degrees. The device measures angular tilt in reference to gravity. The MEMS device incorporates a micro-electro-mechanical capacitive element into the sensor. The element utilizes two parallel plate electrodes: one stationary and one attached to a spring-mass system. Movement causes acceleration that produces deflection in the non-stationary electrode. This results in a measurable change in the capacitance between the two plates that is proportional to the angle of deflection. The inclinometers are IP68 rated, with a temperature range of -30 to 70 degrees C.