Filtration & Separation

Subscribe

The multipurpose 50 mm filters are designed for small volume venting, gas and solvent filtration. The filters are offered with stepped hose barb inlet/outlet connections. Designed and supported for bi-directional

The 8.6-inch diameter spun-bonded polyester filter cartridges are washable and easy to replace. To meet differing needs, the filters can be ordered in many sizes, with from 2 to 200

The centrifugal sifter for screening small batches of pharmaceutical powders and other contamination-sensitive products, can be disassembled rapidly, and sanitized manually or in an autoclave. As material is gravity-fed into

The new medium capacity centrifugal screener features a cantilevered shaft with two, externally-mounted bearings between the screening chamber and motor drive, allowing all internals to slide freely from the shaft

The size/density separator employs vibratory screening to remove undersize particles, and airflow to simultaneously remove low bulk density materials. According to the manufacturer, it efficiently separates fines and chaff from

The new line of gravity flow sifters series operates with a horizontal gyratory sifting motion that is recognized for its superior performance and precision separations. Horizontal gyratory motion retains material

The screen features a cellular construction which utilizes a robust cage design reinforced with high-tensile-strength steel rods. These frames balance durability with strength, resulting in enhanced performance including more efficient

The low-cost filter vessel includes a one-piece body design to eliminate the multiple welds typically used to fabricate bag vessel bodies. The vessels feature the standard "no tools required" four-bolt

The static dewatering sieve continuously removes solids from waste streams at ultra-high rates, clarifying high volumes of process and municipal wastewater at low cost. The sloped screening deck is fitted

Designed using low-cost, environmentally-friendly materials, the filter bags provide a greater retention efficiency, operational integrity and reliability. The bags feature a molded top ring seal and all-welded construction of new