View Cart (0 items)

Explosion Protection

Inlet Isolation Device

November 8, 2012
Industrial processes can result in explosive dust/air mixtures in equipment such as dust collectors, mills and the like. If ignition sources cannot be eliminated due to process conditions, these
Read More

Explosion-Proof Multi-Shaft Mixer with PLC Controls

May 19, 2011
The VersaMix Multi-Shaft Mixer shown is a 100-gallon VersaMix equipped with a three-wing anchor agitator, high speed disperser, rotor/stator mixer designed for sub-surface powder induction, feed ports with pneumatically-actuated ball
Read More

Two-story blast resistant modules available for lease fleet

October 2, 2009
The engineers at the company know that workplace safety is mandatory for all products the company custom designs, engineers and manufactures. They also know space is limited for blast-resistant
Read More

Pulse-jet style dust collector captures explosive resin

December 8, 2008
The new collector with walk-in plenum filters dust from belt conveyors and bagging lines. Air volume is 4000 ACFM with an air-to-cloth ratio of 3.9:1. Explosion relief vents, grounded filter
Read More

Explosion-proof/flame-proof custody transfer density meter

December 3, 2008
The unit features class-leading performance of the 7835 density meter, while eliminating the barriers and galvanic isolators required with intrinsically safe instruments. This simplifies installation and significantly reduces project
Read More

Shaft seals reduce airborne dust and vapors

July 16, 2008
Bulk processing plants with potentially explosive atmospheres are assessing their risks and reviewing all of their equipment, including shaft seals, to minimize explosion risk. Such plants include processors of hydrocarbons
Read More

Durable magnetically actuated level switch

July 14, 2008
K-TEK recently introduced the MS41, the industry''s most durable, magnetically actuated electric switch, according to the manufacturer. The MS41 features a compact, dual-compartment design that isolates the 10 ADPDT (double
Read More

Mixers designed for easy mounting to IBCs or totes

June 12, 2008
Neptune Mixer Company’s new Series HGL (430 RPM) mixers allow easy integration with standard intermediate bulk-containers (IBCs) or poly tote bins by use of an optional 2” 316SS bulkhead fitting.
Read More

Operating Motors In Wet Or Damp Environments

May 13, 2008
When electric motors are installed in wet or damp areas, the life of the motor is almost always shortened from what would be expected in a dry situation. However,
Read More

IVE™ Mechanical Isolation Valve Added to Explosion Suppression Line

February 25, 2008
BS&B Pressure Safety Management, L.L.C. introduces the TYPE IVE™ Mechanical Isolation Valve to guard against the passage of hot particles, glowing embers and flames through interconnecting piping that may ignite
Read More