Kason Corp.

Subscribe

The insulated, high capacity centrifugal screener features an insulated jacket that maintains the temperature of hot or cold materials being sifted, while keeping the machine''s exterior skin closer to room

The centrifugal sifter for screening small batches of pharmaceutical powders and other contamination-sensitive products, can be disassembled rapidly, and sanitized manually or in an autoclave. As material is gravity-fed into

The new medium capacity centrifugal screener features a cantilevered shaft with two, externally-mounted bearings between the screening chamber and motor drive, allowing all internals to slide freely from the shaft

The size/density separator employs vibratory screening to remove undersize particles, and airflow to simultaneously remove low bulk density materials. According to the manufacturer, it efficiently separates fines and chaff from

The circular vibratory bag dump screener removes oversize particles from manually dumped bulk materials while protecting the operator and plant environment against dust contamination. Integral to the mobile unit is

The dewatering-drying system consists of a circular vibratory screener integrated with a circular fluid bed dryer that removes oversize and undersize particles, while dewatering and drying on-size material, according to

The static dewatering sieve continuously removes solids from waste streams at ultra-high rates, clarifying high volumes of process and municipal wastewater at low cost. The sloped screening deck is fitted

The 60 inch diameter screener with "External Kascade" deck is intended for screening of wet or dry bulk materials containing a large percentage of oversize fractions, at higher rates

Normal 0 0 1 112 641 5 1 787 11.1282 0 0 0 The centrifugal screener features a cantilevered shaft with two, externally-mounted bearings between the screening chamber and

The centrifugal screener features a hinged end cover and three-bearing shaft that cantilevers for quick removal of internal components. External roller bearings at the motor end of the shaft