The drum unloader system (DUS) has been designed to hygienically handle highly-viscous food products that need to be transferred from storage barrels into mixing tanks during the manufacturing process. The DUS uses stainless-steel parts and has been designed for use with the company’s AODD pump. It incorporates a pneumatic piston system that acts upon a follower plate to assist in the removal of highly-viscous products from drums. When the system is in service, the pneumatic piston lowers the follower plate over the drum on to the surface of the product. This optimizes the pump’s suction condition so that it draws in the product instead of air, which prevents cavitation and increases efficiency. The use of a follower plate also eliminates the need for an inlet manifold, minimizing suction losses, inaccurate drum alignments and product waste.
The
gravity-loaded bottom-discharge dense-phase conveyors are ideal for
moving powdered, granular, or pelletized friable and abrasive
materials, according to the manufacturer. They are rated up to 100+ TPH
and provide high material-to-air ratios and extremely low line
velocities.
Interested in contributing a feature article or guest column for Processing or Global Processing? E-mail dennis@grandviewmedia.comfor more information.
The drum unloader system (DUS) has been designed to hygienically handle highly-viscous food products that need to be transferred from storage barrels into mixing tanks during the manufacturing process. The DUS uses stainless-steel parts and has been designed for use with the company’s AODD pump. It incorporates a pneumatic piston system that acts upon a follower plate to assist in the removal of highly-viscous products from drums. When the system is in service, the pneumatic piston lowers the follower plate over the drum on to the surface of the product. This optimizes the pump’s suction condition so that it draws in the product instead of air, which prevents cavitation and increases efficiency. The use of a follower plate also eliminates the need for an inlet manifold, minimizing suction losses, inaccurate drum alignments and product waste.
The
gravity-loaded bottom-discharge dense-phase conveyors are ideal for
moving powdered, granular, or pelletized friable and abrasive
materials, according to the manufacturer. They are rated up to 100+ TPH
and provide high material-to-air ratios and extremely low line
velocities.
