Trelleborg launches low friction lightweight thermoplastic composite bearing

Aug. 23, 2022
Manufactured using Trelleborg’s Automated Fiber Placement technology, a thin low friction liner is bonded to the inner diameters and can be added to the outer diameters of the bearing to create a quality solution for use in a wide range of industries.

August 23, 2022 (Trelleborg release) — Trelleborg Sealing Solutions has launched its latest lightweight thermoplastic composite bearing, the HiMod Advanced Composite Bearing Plus, an enhanced dual-layer bearing with a low-friction modified PEEK layer that reduces friction and increases wear performance for use in bearing, wear ring and bushing applications.

Manufactured using Trelleborg’s patented Automated Fiber Placement (AFP) technology, a thin low friction liner is bonded to the inner diameters and can be added to the outer diameters of the bearing to create a high-quality solution for use in a wide range of industries. HiMod Advanced Composite Bearing Plus will not seize or gall, unlike metal bearings — reducing the likelihood of pump damage in chemical processing applications — have a low coefficient of friction and can withstand extreme temperature ranges.

Reid Hislop, product manager at Trelleborg Sealing Solutions, says: “Thermoplastic bearings offer high durability and toughness for demanding applications. The addition of a low-friction layer within our HiMod Advanced Composite Bearing Plus provides up to 50% less sliding friction than with standard bearings, to increase performance and prevent damage to hardware components.

“These unique bearings can operate from an extremely low temperature of -156°C to +274°C (-250°F to +525°F) and are capable of continuous service even when wet, with nearly zero water absorption. Unlike other non-metal bearings, these do not crack or swell in extreme conditions making them a reliable choice for a wide range of applications.”

Trelleborg’s AFP technology is part of a special continuous-fiber thermoplastic composite manufacturing process, which uses pre-impregnated unidirectional composite tapes to produce strong, light-weight composite bearings and other components. The manufacturing process utilizes In-Situ Consolidated (ISC) technology that requires no autoclave or other post processes to eliminate fiber wrinkling and offer an unlimited choice of fiber angles. Components are rapidly formed by a melt-bond process, which removes the need for adhesives, fasteners, or welding. ISC technology enables the bonding of different materials which can result in the creation of new, hybrid structures.

Hislop, continues: “Our low-friction PEEK liner doubles as a highly impermeable sealing surface to provide wide chemical compatibility including solvents and environmental contaminants, and unlike traditional thermoset composites, thermoplastic composites can be recycled at the end-of-life.”

To find out more visit www.trelleborg.com/seals

Request More Information

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.