Valves & Actuators

Courtesy of Preferred Utilities Manufacturing Corporation
Preferred Utilities Manufacturing Corporation partnered with Emerson to develop a UL-certified, high-pressure safety shutoff valve compatible with B100 for its API burners.
Preferred Utilities partnered with Emerson to deliver the first UL-certified industrial burner shutoff valve designed for use with 100% biodiesel, marking an important milestone...
May 13, 2026
Courtesy of Swagelok
Selecting the right valve requires knowing your options and their capabilities.
Members Only
Nov. 3, 2025
Spartan Scientific
A custom solenoid valve with integrated manifold for beverage production use.
June 24, 2025
Courtesy of Emerson
Figure 1: Emerson-trained technicians confirm the correct installation of control valves.
Members Only
April 29, 2025
Courtesy of Emerson
Figure 5: For slurries, a Fisher V500 Eccentric Plug Valve with high hardness trim can be a good choice (left). Corrosive liquid flow can be tightly controlled using rising stem valves, like the Fisher GX (middle) or E-Series (right), each with carefully chosen materials of construction.
Nov. 12, 2024
Courtesy of Emerson
This diagram shows the common functional failure points of a control valve. The basic diagnostics available in nearly all Fisher digital valve controllers can detect and alert most of these failures — but only if they are enabled, configured and monitored.
Aug. 28, 2024
Courtesy of Emerson
Lead Image
Feb. 28, 2024
Courtesy of Emerson
Figure 1: A typical on/off isolation valve employs an open/closed limit switch assembly to indicate valve position. This works well for non-critical applications, but the on/off nature of the position signal limits the ability to employ diagnostics.
Jan. 5, 2024
Courtesy of Emerson
Figure 1: The silicon chip manufacturing process builds numerous chips layer by layer on a single wafer of silicon. Materials are deposited, carefully polished, selectively etched and covered with new materials in a multistep process.
July 11, 2023

Looking for Something?